Fisher FIELDVUE DVC6200p Instruction Manual page 141

Instruction Manual
D103563X012
Table C‐12. Alarm Transducer Block Parameter Definitions
Label
PARAMETER_NAME
BM_37
Status_Class
Logbook_Entry
Output_Reference
Supervision
Text
SIMULATE_ENABLED
View Lists
View lists allow the values of a set of parameters to be accessed at the same time.
Table C‐13. Alarm Transducer Block, View 1
Index Number
1 ST_REV
6.1 MODE_BLK.ACTUAL
6.2 MODE_BLK.PERMITTED
6.3 MODE_BLK.NORMAL
7.1 ALARM_SUM.CURRENT
7.2 ALARM_SUM.UNACKNOWLEDGED
7.3 ALARM_SUM.UNREPORTED
7.4 ALARM_SUM.DISABLED
8 STATUS_CLASSES
9 ACTIVE_MESSAGES
Index RO / Block
Number RW Mode
52
The
52.1
which this Binary Message
will belong to.
False: Do not store in
52.2 Logbook
True: Store in Logbook
Used to control exactly one
RW ALL
DO, this parameter will
52.6 have
connected DO Block in the
device
0: Supervision switched
OFF; Message Inactive
1: Supervision switched
52.4
OFF; Message active
2: Supervision ON
52.5 ASCII Text
0: Disabled
53 RW ALL
1: Enabled
Parameter
Range Initial Value
STATUS_CLASS to
0x0008
FALSE
the number of 0
0
AI Lo Limit
Extended Parameters
0
Blocks —Alarm Transducer Block
Description
Data Type: DS-62
AI Lo Limit Exceeded
Data Type: Unsigned16
Default: LIMITS = 0x0008
Data Type: Boolean
Data Type: Unsigned8
Data Type: Unsigned8
Data Type: Visible String
Data Type: Unsigned8
Enable or disable simulation. Simulation must
be enabled to cause the alerts to be activated
when the corresponding binary message.
Supervision = 1.
June 2017
139