Parts Ordering - Fisher EZ-C Instruction Manual

EZ-C, ET-C, and EWT-C Valves

Parts Ordering

Each body-bonnet assembly is assigned a serial
number which can be found on the valve. This same
number also appears on the actuator nameplate
when the valve is shipped from the factory as part of
a control valve assembly.
Refer to the serial number when contacting your
Emerson Process Management sales office for
technical assistance. When ordering replacement
parts, refer to the serial number and to the
eleven-character part number for each part required
from the following parts kit or parts list information.
WARNING
Use only genuine Fisher replacement
parts. Components that are not
12
Instruction Manual
supplied by Emerson Process
Management should not, under any
circumstances, be used in any Fisher
valve, because they will void your
warranty, might adversely affect the
performance of the valve, and might
jeopardize worker and workplace
safety.
Note
Neither Emerson, Emerson Process
Management, Fisher, nor any of their
affiliated entities assumes
responsibility for the selection, use
and maintenance of any product.
Responsibility for the selection, use,
and maintenance of any product
remains with the purchaser and
end-user.
Form 5376
August 2006