Table of Contents
Advertisement
2.2.4 PPTP
This mode lets user get the IP group information by a DSL modem with PPTP service from
ISP. Your service provider will give you user name, password, and authentication mode for a
PPTP setting. Click PPTP as the protocol. Type in all the information that your ISP provides
for this protocol.
If your ISP offers you PPTP (Point-to-Point Tunneling Protocol) mode, please select PPTP
for this router. Next, enter the PPTP Subnet Mask (e.g., 255.255.255.0), PPTP Local
Address (e.g., 10.66.99.88) and PPTP Server Address (e.g., 172.66.99.88) provided by
your ISP on the web page.
PPTP Local Address
PPTP Subnet Mask
PPTP Server Address
After setting up the PPTP, click Next to setup the LAN interface continuously.
IP Address
Subnet Mask
Status
Vigor3300V+ Series User's Guide
Assign a local IP address of PPTP.
Assign a net mask value for IP address of PPTP.
Assign a remote IP address of PPTP server.
Type an IP address for the LAN interface.
Type the subnet mask for the LAN interface.
Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
21
Advertisement
Table of Contents
