Table of Contents
Advertisement
Profile Status
Name
Local Subnet
Remote Subnet
Tunnel 1~ Tunnel 4
Weight
Active
Master/Slave
After finish the configuration, click Apply to apply the group table setting.
L
o
g
L
o
g
At any time, you can click VPN >>IPSec>> Log to monitor the VPN tunnel status. The log
is helpful for solving some setting problems. The system will keep the 100 most recent
messages. Click Clear to clear the log.
Vigor3300V+ Series User's Guide
Set the initialization of IPSec Tunnel with this profile.
Enable – Choose this one to activate this profile.
Disable – Choose this one to inactivate this profile.
Type a name for this group.
LAN subnet of this device.
LAN subnet of the remote client.
Specify which tunnel will be included in this trunk. You can
choose up to four tunnels at one time.
Determine how many flow rates can pass through on this
tunnel. For example, type 1 for tunnel 1 and type 4 for tunnel
2. If such device has 5 packets needing to send to the remote
subnet, it will send 4 packets through tunnel 2 and 1 packet
through tunnel 1.
Check this box to enable VPN tunnel backup.
Choose the master and salve roles for this backup
configuration.
173
Advertisement
Table of Contents
