Table of Contents
Advertisement
2.2.2 DHCP Mode
DHCP allows a user to obtain an IP address automatically from a DHCP server on the
Internet. If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP
address for Vigor3300 automatically. It is not necessary for you to assign any setting. (Host
Name and Domain Name are required for some ISPs).
Simply click Next to setup LAN interface.
IP Address
Subnet Mask
Status
Start IP
End IP
Primary DNS
Secondary DNS
Lease Time (Min)
Gateway IP (Optional)
Next, click DHCP Relay Agent tab to set DHCP server if required.
Vigor3300V+ Series User's Guide
Type an IP address for the LAN interface.
Type the subnet mask for the LAN interface.
Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
Type the start IP address of the IP pool that DHCP server can
use for clients in LAN.
Type the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
Type the IP address for primary DNS.
Type a private IP address to the secondary DNS.
Set a lease time for the DHCP server. The time unit is minute.
Set a gateway IP address for the DHCP server.
17
Advertisement
Table of Contents
