Table of Contents
Advertisement
Besides, you can add new filter rule for the group. On the edit page of IP Filter Table, click
the Add Rule button. The following page will be shown.
Source IP
Subnet Mask
Source Port
It means the source IP address. Placing the symbol "!" before
a particular IP address will prevent this rule from being
applied to that IP address. It is equal to the logical NOT
operator.
It means the subnet mask for the source IP.
It means the port for the source IP. Type the values in the
boxes of start port and end port. As for the operators
If the Start Port column is empty, the Start Port and the End
Port column will be ignored. The filter rule will filter out any
port number.
(=) - If the End Port column is empty, the filter rule will set
144
Vigor3300V+ Series User's Guide
Advertisement
Table of Contents
