Table of Contents
Advertisement
via PAP or CHAP with RADIUS authentication system. And your IP address, DNS server,
and other related information will usually be assigned by your ISP.
Below shows the menu items for Network.
4.2.1 WAN
The Vigor3300V+ Series supports four WAN interfaces (Static, DHCP, PPPoE and PPTP),
which share the same setting page. Click Network >>WAN. The following page will be
shown.
Load Balance
Backup
Edit
IP Mode
Active
Default Route
Enables or disables the WAN load balance function. The Auto Weight
option becomes available if Enable mode is selected. Load Balance
allows the router distributing data in and out of the Internet by using
different WAN interfaces at the same time.
Enables or disables backup function for WAN interfaces. If you enable
this function, the backup-master/backup-slave will execute the job of
master/slave device when the master/slave device fails to work.
Open the configuration page of this WAN interface.
Display current mode of this WAN interface. There are five options:
Static, DHCP, PPPoE, PPTP and DHCP.
Activates/closes this WAN interface.
Set this WAN interface as default route interface.
102
Vigor3300V+ Series User's Guide
Advertisement
Table of Contents
