Draytek VIGOR3300V+ User Manual page 194

Disable/Enable
Username
Password
Display Name
Authentication ID
Proxy Server
Call without Registration
VoIP IP Address
Call Forwarding
Subscribe for MWI
MWI Inform
CLIP
Click the radio button to enable or disable the SIP account.
Define the account name or number.
Define the password for this account. You can change it if
required.
Define the name recognized by the remote end.
Type the name or number used for SIP Authorization with SIP
Registrar.
Choose the proxy server (pre-configured in
VoIP>>Protocol>>SIP Configuration) for such account.
If you want to make VoIP call without register personal
information, please choose Enable and check the box to
achieve the goal. Some SIP server allows user to use VoIP
function without registering.
The interface is used to apply VoIP traffics. There are two
options: WAN and LAN/VPN. If LAN/VPN is selected, VoIP
can be applied through a VPN tunnel to create a high security
voice phone.
Disable - Disable forwarding function.
Call forwarding all calls - Forward all incoming calls to the
specified SIP URL site.
Call forwarding busy - Forward incoming calls to the
specified SIP URL site when this line is busy.
Call forwarding no answer after (Range: 1~10) rings-
Forward incoming calls to the specified SIP URL site after
ringing the times that you set here.
SIP URL - Assign a SIP URL site (e.g., aaa@draytel.org or
abc@iptel.org) to receive forwarded calls.
This function is used to set SIP account for sending a message
to the proxy server for subscribing MWI (Message Waiting
Indicator). Part proxy server may need such subscription, yet
not all of the proxy servers need.
Play Special Dial Tone – Play congest tone for five seconds
while off-hook to inform you MWI message.
Hide the caller ID on the display panel of the phone set.
IncomingCall CLIP display – If you choose No display, no
name and number of the incoming calls will be displayed. If
you choose Display number only, just the number of the
incoming calls will be displayed. If you choose Display name
and number, then the name and number of all the incoming
186
Vigor3300V+ Series User's Guide