Table of Contents
Advertisement
Key Lifetime (quick) The renegotiated period of the IKE Phase2 keying channel.
Proposal (quick)
Accepted Proposal
Delay
Timeout
Auto GRE Key
GRE Key In
GRE Key Out
After finish the configuration, click Apply to apply the IPSec policy setting into the policy
table.
Significant fields will be summarized in the IPSec Table. Operational Status reflects the
current status of the tunnel. UP means the IPSec tunnel has been established. DOWN means
no tunnel existing, or termination status of the tunnel.
Vigor3300V+ Series User's Guide
The acceptable range is from 5 to 1440 minutes (24 hours).
The proposed encryption and/or authentication algorithms for
IKE Phase2 negotiations. There are 2 options.
Encryption algorithms –NULL/DES/3DES/AES.
Authentication algorithms - MD5/SHA1
If you choose Only accept proposal listed above, only the
selected proposal will be accepted and applied by this device.
If you choose Accept all supported proposal, all the
proposals supported by this device will be accepted and
applied.
The keep-alive timer. A Hello message will be emitted
periodically when a tunnel is idle. Use the value 0 to disable
this function. The recommended value is 2 seconds if enabled.
The timeout timer. The peer will be declared dead once no
acknowledge message is received after timeout value. Use the
value 0 to disable this function. The recommended value is 4
seconds if enabled.
Check this box to automatically generate GRE key. Or, type
the GRE key on the fields below manually
This value is used for the router to authenticate the source of
the packet. The length is 4 bytes.
This value is used for the remote client to authenticate the
source of the packet. The length is 4 bytes.
171
Advertisement
Table of Contents
