Table of Contents
Advertisement
Start IP
End IP
Primary DNS
Secondary DNS
Lease Time (Min)
Gateway IP (Optional)
Next, click DHCP Relay Agent tab to set DHCP server if required.
WAN Interface
DHCP Server IP Address
Next, click IP Routing tab to set routing path for each WAN interface if required.
When you finished the above settings, please click Finish. A system reboot page will appear.
Click Apply to activate the PPTP mode configuration.
Type the start IP address of the IP pool that DHCP server can
use for clients in LAN.
Type the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
Type the IP address for primary DNS.
Type a private IP address to the secondary DNS.
Set a lease time for the DHCP server. The time unit is minute.
Set a gateway IP address for the DHCP server.
Choose the WAN interface for such connection.
Type an IP address for the DHCP server.
22
Vigor3300V+ Series User's Guide
Advertisement
Table of Contents
