Table of Contents
Advertisement
User Name
Password
Get DNS Server from LAN
Setting
Get DNS Server by
Manual Setting
Primary DNS
Secondary DNS
When you finish the configuration, please click Apply to invoke it.
L
2
T
P
G
L
2
T
P
G
To configure the general setup, please click VPN>> PPTP & L2TP>>General
Setup>>L2TP General Setup.
Status
L2TP Authentication
User Authentication
Enable/Disable
User Name
Password
Vigor3300V+ Series User's Guide
Type the user name that the other side provides for carrying
out mutual authentication whenever you want.
Type the password that the other side provides for carrying
out mutual authentication whenever you want.
Use DNS setting of LAN configuration.
If you click this radio button, please type the primary DNS
and secondary DNS IP address manually in the following
fields.
Type the IP address for primary DNS.
Type the IP address for secondary DNS.
e
n
e
r
a
l
S
e
t
u
p
e
n
e
r
a
l
S
e
t
u
p
Set the function to Active or Inactive.
Allow you to choose an authentication mode to be used. The
default setting is CHAP.
Set user authentication to Local server or RADIUS server.
Enable or disable the Mutual Authentication function.
Type the user name that the other side provides for carrying
out mutual authentication whenever you want.
Type the password that the other side provides for carrying
out mutual authentication whenever you want.
179
Advertisement
Table of Contents
