Table of Contents
Advertisement
F
o
r
M
G
C
P
C
o
n
f
i
g
F
o
r
M
G
C
P
C
o
n
f
i
g
MGCP Local Port
MGCP Call Agent Address The IP address of the Call Agent server in MGCP.
MGCP Call Agent Port
EndPoint Name Style
Logic ID Starting Number Determine the starting number for the endpoint name. There
Wild-carded RSIP
S
S
I
I
P
P
A
A
c
c
c
c
o
o
u
u
n
n
t
t
s
s
In this section, you set up your own SIP settings. When you apply for an account, your SIP
service provider will give you an Account Name or user name, SIP Registrar, Proxy, and
Domain name. (The last three might be the same in some case). Then you can tell your folks
your SIP Address as in Account Name@ Domain name
u
r
a
t
i
o
n
u
r
a
t
i
o
n
The UDP port number in MGCP local terminal.
The UDP port number for the Call Agent server.
Choose a proper name style for the VoIP settings. There are
three options for you to choose.
aaln/#@[ip_addr] - ex: aaln/1@[1.1.1.1]
mac_addr/#@[ip_addr]- ex: 000504030201/1@[1.1.1.1]
aaln/#@mac_addr- ex: aaln/1@000504030201
aaln/#@ - ex: aaln/1@v3300.draytek.com
are eight ports in Vigor3300 series. The default name for
endpoint will be "aaln". If you type "1" in this filed, the
endpoint name will be "aaln/1, aaln/2...,aaln/8". If you type
"11" in this field, the endpoint name will be "aaln/11,
aaln/12....aaln/18", etc. Simply keep the default value (1).
For VoIP phone call with MGCP configuration, each port will
send RSIP to call agent for notifying that port is initiated or
restarted.
Each endpoint sends its own RSIP – Each port must send
one RSIP message (e.g., aaln/1@[172.16.3.5]) to call agent
respectively.
Send only one wild RSIP – Only one RSIP message (e.g.,
aaln/*@[172.16.3.5]) will be sent to call agent to indicate all
ports are initiated/restarted.
184
Vigor3300V+ Series User's Guide
Advertisement
Table of Contents
