Table of Contents
Advertisement
When you click Edit, the following page will appear for you to configure. (Such page is
available for FXO module)
Port
Hotline
FXO
Codec
Click Enable to activate this port or Disable to close this port.
Default SIP Accounts – Use the drop down list to choose one
item as the default SIP account.
VoIP IP Address - The interface is used to apply VoIP
traffics. There are two options: WAN and LAN/VPN. If
LAN/VPN is selected, VoIP can be applied through a VPN
tunnel to create a high security voice phone.
Hotline Number to Internet - Pre-set a phone number to
make the port dialing out to Internet automatically.
Hotline Number to PBX - Pre-set a phone number to make
the port dialing out to PBX automatically.
Manual Disconnection - Click Disconnect to disconnect this
phone line manually.
Preferred Codec - It can be applied on this port. Vigor3300
supports five Codecs. The default setting is G.729A. You can
choose another one as preferred Codec for outgoing calls.
194
Vigor3300V+ Series User's Guide
Advertisement
Table of Contents
