Table of Contents
Advertisement
S
t
a
t
i
c
I
P
S
e
t
u
p
S
t
a
t
i
c
I
P
S
e
t
u
p
It means that the IP group information for WAN interface is manually assigned by the user.
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
MTU
Host Name
Domain Name
Detect Type
Detect Interval (sec)
No-Reply Count
Set the private IP address of WAN interface.
Set the subnet mask value of WAN interface.
Set the private IP address of gateway.
Set the private IP address of primary DNS.
Set the private IP address of secondary DNS.
Mean maximum transmission unit of one packet. The default
value is 1500.
Some ISP may ask you to type your host name. Please type in
if necessary.
Some ISP may ask you to type your domain name. Please type
in if necessary.
Select a detecting type for this WAN interface. There are three
ways Send ARP to Gateway, Send PING and Send HTTP
Request supported in 3300.
Assign an interval period of time for each detecting. The
minimum value is 3 and no limit for maximum value.
Assign detecting times to ensure the connection of the WAN.
After passing the times you set in this field and no reply
104
Vigor3300V+ Series User's Guide
Advertisement
Table of Contents
