Table of Contents
Advertisement
ISDN Mode
MSN numbers
Do Not Disturb
Apply
Vigor3300V+ Series User's Guide
Under CHT mode, call waiting and call transfer function will
be:
Call Waiting - You can hear waiting tone while a new phone
call is incoming, then you can do:
(1) Flash hook: This procedure always holds the current
connection and connect with the second connection.
(2) On hook: This procedure disconnects the current
connection and connects with the new phone call.
Call transfer - Flash hook to initiate another phone call.
When the new phone call connected, hang up the phone,
and then the other two sides can communicate.
Port 1 and Port 3 are fixed in NT mode. Therefore you cannot
change it.
Port 2 and Port 4 are switchable between NT and TE mode.
Port 1 ~ Port 4 are fixed in NT mode if you have installed
ISDN All TE module in the router.
MSN Numbers mean that the router is able to accept only
number-matched incoming calls. In addition, local ISDN
network provider should support MSN services. The router
provides ten fields for MSN numbers. Note that MSN service
must be acquired from your local telecom operators.
1-10 fields – Fill in the portion that is different with the own
number. If the MSN number of ISDN phone matches with the
configured MSN number, the ISDN phone will uses default
account which matches with MSN number pre-configured.
Example:
Suppose ISDN phone is connected to Port 5 with MSN
number set 51. The router uses the default ten MSN number
from 51 – 59. When a user calls out via ISDN phone, the
router finds that the MSN number of the ISDN phone matches
with the first configured MSN number. Then the router will
use the SIP account set for MSN number 51 for calling out.
Reject all of the incoming calls to this port. Click Enable to
activate this function.
When you finish all the configurations, please click this button
to activate them.
193
Advertisement
Table of Contents
