Table of Contents
Advertisement
Call Park
IncomingCall Rings
Ring Port Setting
Vigor3300V+ Series User's Guide
calls will be displayed on the phone set.
OutgoingCall CLIP display – If you choose No hidden, then
the name and number of the outgoing calls will be displayed
on remote end. If you choose Hidden name only, just the
number of the outgoing call will be displayed. If you choose
Hidden name and number, the name and number of all the
outgoing calls will not be displayed on the phone set of
remote end.
It allows a person to put a call on hold at one telephone set
and continue the conversation from any other telephone set.
Such number you type here is determined by your ISP. The
default Call Park Dial Number is "700".
Rings all ports in the group – Click this radio button to make
all ports in the same SIP account ringing while receiving
incoming calls.
Rings the first available port –Click this radio button to
make the first available port in the same SIP account ringing
while receiving incoming calls.
Rings by round robin - Click this radio button to make the
phone port ringing in sequence within the same SIP account.
When someone calls this SIP account, the port (P1- P8)
selected here will ring. If someone calls this SIP account via
ISDN phone and Any is chosen as the ring port setting, all the
ISDN phones connected to this port will ring. Yet, if you
choose only one MSN number (10, 11, 12, 13, 14, 15, 16, 17,
18,19) for that port, only the phone with the number you
selected will ring.
187
Advertisement
Table of Contents
