Table of Contents
Advertisement
5.
Set Port 2 ~ Port 8 one by one in turn.
Type: Port 1 ~Port 4 are FXS, Port 5 ~Port 8 are FXO.
Active: Port 1 ~Port 8 are all active (v=Enable).
SIP Account: Accounts of Port 1 ~ Port 8.
Codec: Port 1 ~Port 8 all prior use G.729A - 8kbps.
6.
Check the VoIP Status. Please enter the VoIP – Status - SIP Status page first and wait
one or two minutes (The time depends on SIP Server's response speed and the network
condition). OK means the registration is successful; Failed means the registration is
failed.
Next, please enter VoIP – Status - Port Status. This page will display calling
information from Port 1 ~ Port 8. Idle means there is no conversations on Port 1 ~ Port
8.
Vigor3300V+ Series User's Guide
53
Advertisement
Table of Contents
