Waste Toner Bottle - Ricoh Z-P2 Field Service Manual

4. Replacement and Adjustment
7. Turn the lock lever clockwise to lock it.
8. Close the left cover.

Waste Toner Bottle

If you replace the waste toner bottle after the machine detects that it is full or near-full, the machine
automatically resets the PM counter for the waste toner bottle after replacement.
But, if you replace a bottle that is not full or near-full, then you must reset the PM counter for this unit. To
do this, set SP3-902-020 to 1 before you start to work on the machine.
1. Open the left cover [A].
110