Ricoh Z-P2 Field Service Manual page 362

5. System Maintenance Reference
2-657-001 PTr : 1st
2-657-002 PTr : 2nd
2-657-003 SepaDC:1st
2-657-004 SepaDC:2nd
2660 [Thick3: EnvCor] DFU
Thick 3 Paper: MM Environment Coefficient Adjustment
2-660-015 SepaDC:1st
2-660-016
SepaDC:2nd
[TThick3:Ed-Env.Cor] DFU
2-660-019 SepaDC:1st
2-660-020
SepaDC:2nd
2701 [MThick: Bias]
Adjusts the DC voltage of the discharge plate for middle thick paper.
2-701-001 SepaDC:StdSpd:1st
2-701-002 SepaDC:StdSpd:2nd
2-701-003 SepaDC:LowSpd:1st
2-701-004 SepaDC:LowSpd:2nd
2703 [MThick:Bias:BW]
Standard: 260mm/sec, Low: 85mm/sec
Adjusts the current for the paper transfer roller for middle thick in black-and-white
mode.
2-703-001 PTr:StdSpd:1st
360
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
*ENG
table of the thick 3 paper for the
discharge plate DC for each printing
side.
*ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
*ENG
table of the thick 3 paper for the
discharge plate DC (leading and traiing
edges) for each printing side.
*ENG [0 to 6000 / 2000 / 10 -V /step]
*ENG
*ENG
*ENG
*ENG [0 to 230 / 20 / 1- A /step]