Ricoh Z-P2 Field Service Manual page 346

5. System Maintenance Reference
2-522-001 PTr:Mid:1st
2-522-002 PTr:Mid:2nd
2-522-003 PTr: Low : 1st
2-522-004 PTr: Low : 2nd
2-522-005 SepaDC:Mid:1st
2-522-006 SepaDC:Mid:2nd
2-522-007 SepaDC:Low:1st
2-522-008 SepaDC:Low:2nd
2523 [Thick1:TE Correct] DFU
Thick 1 Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper
trailing edge in each mode. SP2502 and SP2507 are multiplied by these SP values.
Middle: 182 mm/sec, Low: 85 mm/sec
2-523-001 PTr:Mid:1
2-523-002 PTr:Mid:2
2-523-003 PTr: Low: 1st
2-523-004 PTr: Low: 2nd
2-523-005 SepaDC:Mid:1st
2-523-006 SepaDC:Mid:2nd
2-523-007 SepaDC:Low:1st
2-523-008 SepaDC:Low:2nd
344
• The paper trailing edge area can be adjusted with SP2524.
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG [0 to 995 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG