Ricoh Z-P2 Field Service Manual page 449

5-816-206 Instl:Rgstltn
Executes "Embedded RCG Registration".
5-816-207 Instl:Rgstltn Rst
Displays a number that indicates the registration result.
0: Succeeded
1: Inquiry number error
2: Registration in progress
3: Proxy error (proxy enabled)
4: Proxy error (proxy disabled)
5: Proxy error (Illegal user name or
password)
8: Other error
9: Registration executing
20: Dial-up failure (modem type
only)
5-816-208 Instl:ErrorCode
Displays a number that describes the error code that was issued when either
SP5816-204 or SP5816-207 was executed.
Cause
Illegal Modem
Parameter
CTL [- / - / -]
[Execute]
CTL [0 to 255 / 0 / 1/step]
21: Ansewer tone detection failure (modem
type only)
22: Carrier detection failure (modem type
only)
23: Modem setting parameter error (modem
type only)
24: Power supply error (modem type only)
25: Modem line disconnected (modem type
only)
26: Busy line (modem type only)
CTL [-2147483647 to 2147483647 / - /
-/step]
Code Meaning
-11001 Chat parameter error
-11002 Chat execution error
-11003 Unexpected error
-11004 Cutting process occurred during modem
communication.
-11005 NCS reboot occurred during modem communication.
Engine SP Mode Tables - SP5000
447