Ricoh Z-P2 Field Service Manual page 608

6. Troubleshooting
No. Type
872 CTL
B
No. Type
873 CTL
B
No. Type
874 CTL
D
606
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD mail data error
An error is detected in the HDD at machine initialization.
• Defective HDD
• Power failure during an access to the HDD
1. Turn the main switch off and on.
2. Initialize the HDD partition.
3. Replace the HDD.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD mail transfer error
An error is detected in the HDD at machine initialization.
• Defective HDD
• Power failure during an access to the HDD
1. Initialize the HDD partition.
2. Replace the HDD.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Delete All error 1: HDD
An error is detected while all of the HDD or NVRAM are formatted physically by
the DataOverwriteSecurity Unit.
• DataOverwriteSecurity Unit (SD card) not installed
• Defective HDD
1. Install the DataOverwriteSecurity Unit.
2. Replace the HDD.