Ricoh Z-P2 Field Service Manual page 609

No. Type
875 CTL Delete All error 2: Data area
D
An error is detected while all of the HDD or NVRAM are formatted logically by
the DataOverwriteSecurity Unit.
• The logical format for the HDD fails.
Turn the main switch off/on and try the operation again
No. Type
876 CTL Log Data Error
D
An error was detected in the handling of the log data at power on or during
machine operation. This can be caused by switching the machine off while it is
operating.
-001 Log Data Error 1
• Damaged log data file in the HDD
Initialize the HDD.
-002 Log Data Error 2
• An encryption module not installed
1. Disable the log encryption setting with SP9730-004 ("0" is off.)
2. Install the DESS module.
-003 Log Data Error 3
• Invalid log encryption key due to defective NVRAM data
1. Initialize the HDD.
2. Disable the log encryption setting with SP9730-004 ("0" is off.)
-004 Log Data Error 4
• Unusual log encryption function due to defective NVRAM data
Initialize the HDD.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
SC Tables
607