Upload - Ricoh Z-P2 Field Service Manual

Table of Contents

Advertisement

Upload

1.
Turn off the main power switch of the main machine.
2.
Remove the SD slot cover from SD card slot 2 at the left rear side of the machine ( x 1).
3.
Install the SD card, which has already been uploaded, into the SD card slot 2.
4.
Turn on the main power switch.
5.
Enter the SP mode.
6.
Do SP5-846-052 (Restore All Addr Book).
7.
Exit the SP mode, and then turn off the main power switch.
8.
Remove the SD card from SD card slot 2.
9.
Install the SD slot cover on SD card slot 2.
• The counter in the user code information is initialized after uploading.
• The information of an administrator and supervisor cannot be downloaded nor uploaded.
• If there is no data of address book information in the SD card, an error message is displayed.
Address Book Upload/Download
553

Advertisement

Table of Contents
loading

Table of Contents