Ricoh Z-P2 Field Service Manual page 402

5. System Maintenance Reference
3-041-004 Pre-ACC Proc Ctrl
Selects the process control mode that is done before ACC.
3-041-005 Pat Calc Method
3043 [TD Adjust Mode]
3-043-001 Rept Nmbr:PowerON
Specifies the maximum number of repeats of the toner density adjustment at power on.
0: Disabled, 1 to 3: Repeat number,
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and
toner is consumed only when the toner density is too dark.)
6 to 9: Disabled
3-043-002 Rept Nmbr:Initial
Specifies the maximum number of repeats of the toner density adjustment at the
developer initialization.
0: Disabled, 1 to 3: Repeat number,
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low, and
toner is consumed only when the toner density is too dark.)
6 to 9: Disabled
400
*ENG [0 to 2 / 2 / 1/step]
0: Not Execute
1: Process Control
2: TC Control
*ENG [0 to 2 / 0 / 1/step]
0: FIXED
1: INITIALIZED
2: CALCULATED
*ENG [0 to 9 / 4 / 1 time/step]
*ENG [0 to 9 / 3 / 1 time/step]