Ricoh Z-P2 Field Service Manual page 453

5-821-008 RCT Host URL Path
5824 [NV-RAM Upload]
Uploads the UP and SP mode data (except for counters and the serial number) from
the NVRAM to an SD card. For details, see the "NVRAM Data Upload/Download" in
the "System Maintenance Reference" of the Field Service Manual.
5-824-001 -
5825 [NV-RAM Download]
Downloads the UP and SP mode data from an SD card to the NVRAM. For details,
see the "NVRAM Data Upload/Download" in the "System Maintenance Reference"
of the Field Service Manual.
5-825-001 -
5828 [Network Setting]
5-828-050 1284 Compatibility
(Centro)
5-828-052 ECP (Centro)
5-828-065 Job Spooling
*CTL Sets the host URL path of the destination for
processing calls to the @Remote service center.
255 bites characters allowed (0 to 255)
*CTL -
*CTL -
*CTL -
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
• This SP is activated only when SP5-828-50 is set to
"1".
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
Engine SP Mode Tables - SP5000
451