Ricoh Z-P2 Field Service Manual page 276

5. System Maintenance Reference
1-103-017 Ex.Idling Time(H)
1-103-018 Ex.Idling Time(M)
1-103-019 ExIdl Temp:PRoll
1104
1-104-001 Envir. Thresh
1-104-002 Idl Temp:P-Roll
1-104-003 Idling Time:BW
1-104-004 Idling Time:FC
1-104-005 Idl Time:MTh:BW
1-104-006 Idl Time:MTh:FC
007-009 Specifies the thereshold temperature of the paper feed before a job.
1-104-007 P.FeedTemp:P-Roll
1-104-008 P.F Temp:MT:PR:BW
1-104-009 P.F Temp:MT:PR:FC
274
[Fusing Idling BF]
MT: Middle Thick, PR: Pressure Roller
Specifies the threshold temperature for the pressure roller idling before a job.
*ENG [ 0 to 60 / 0 / 1 sec/step]
Specifies the idling time in the high
temperature condition.
*ENG [ 0 to 60 / 0 / 1 sec/step]
Specifies the idling time in the middle
temperature condition.
*ENG [ 0 to 160 / 110 / 1 deg/step]
Specifies the threshold temperature of
the pressure roller for idling extention
mode.
*ENG [0 to 2 / 2 / 1 /step]
Selects the environmental
condition.
0: LL condition
1: LL and MM condition
2: All condition
*ENG [0 to 160 / 160 / 1 deg /step]
*ENG Specifies the fusing idling time for
each printe mode before a job.
*ENG
[0 to 10 / 2 / 1 sec/step]
*ENG
*ENG
*ENG [0 to 160 / 90 / 1 deg/step]
*ENG [0 to 160 / 100 / 1 deg/step]
*ENG [0 to 160 / 100 / 1 deg/step]