Ricoh Z-P2 Field Service Manual page 357

2-630-019 Separation DC
2647 [Thick3: Bias]
Adjusts the DC voltage of the discharge plate for thick paper 3.
2-647-001 SepaDC:1st
2-647-002 SepaDC:2nd
2648 [Thick3: Bias: BW]
Adjusts the current for the paper transfer roller for thick paper 3 in black-and-white
mode.
2-648-001 PTr:1st
2-648-002 PTr:2nd
2649 [Thick3: Bias: FC]
Adjusts the current for the paper transfer roller for thick paper 3 in full color mode.
2-649-001 PTr:1st
2-649-002 PTr:2nd
2650 [Thick3: SzCor: BW]
Adjusts the size correction coefficient for the paper transfer roller current for each
paper size. SP2648 and SP2649 are multiplied by these SP values.
2-650-001 PTr:1:S1
2-650-002 PTr:2:S1
2-650-003 PTr:1:S2
*ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the OHP paper for the discharge
plate DC (leading and traiing edges).
*ENG [0 to 6000 / 2000 / 10 -V /step]
*ENG
*ENG [0 to 230 / 9 / 1 – A /step]
*ENG [0 to 230 / 12 / 1 – A /step]
*ENG [0 to 230 / 12 / 1 – A /step]
*ENG [0 to 230 / 18 / 1 – A /step]
*ENG [100 to 995 / 100 / 5%/step]
S1 size ≥ 194 mm (Paper width)
*ENG
*ENG [100 to 995 / 150 / 5%/step]
194 mm > S2 size ≥ 165 mm
(Paper width)
Engine SP Mode Tables - SP2000
355