Ricoh Z-P2 Field Service Manual page 397

2906 [Drum] DFU
2-906-001 Y Phase Angle
2-906-002 M Phase Angle
2-906-003 C Phase Angle
2-906-004 K Phase Angle
2-906-005 Color Phase Angle
2-906-006 Y AmpSetting
2-906-007 M AmpSetting
2-906-008 C AmpSetting
2-906-009 K AmpSetting
2-906-010 Color AmpSetting
2-906-011 K Stop Position
2-906-012 Color Stop Posi
2907 [FC: ACS] DFU
Adjusts the threshold for moving away the image transfer belt from the color PCUs.
This SP moves the image transfer belt away from the color PCUs when the number of
B/W image printouts reaches the number of sheets specified with this SP after
consecutive full color image printouts in the full color mode.
If this SP is set to "0", the image transfer belt does not move away.
2-907-001 Bk Image Count
2911 [Offset Phase] DFU
2-911-001 Y Drum
2-911-002 M Drum
2-911-003 C Drum
2-911-004 K Drum
*ENG [0 to 359 / 0 / 1 deg/step]
*ENG
*ENG
*ENG
*ENG
*ENG [0 to 100 / 0 / 0.1 m/step]
*ENG
*ENG
*ENG
*ENG
*ENG [0 to 359 / 0 / 1 deg/step]
*ENG
*ENG [0 to 10 / 0 / 1 sheet/step]
*ENG [0 to 359 / 0 / 1 deg/step]
*ENG
*ENG
*ENG
Engine SP Mode Tables - SP2000
395