Ricoh Z-P2 Field Service Manual page 485

-031 to -048 Displays the number of revolutions of motors or clutches for each current
maintenance unit.
When a unit is replaced, the machine automatically detects that the new unit is
installed. Then, the current PM counter value is automatically moved to the PM
Counter - Previous (SP7-906-31 to 49) and is reset to "0". The total number of
revolutions made with the last unit replaced can be checked with SP7-906-31 to 49.
7-803-031 Rotation: PCU: Bk
7-803-032 Rotation: PCU: C
7-803-033 Rotation: PCU: M
7-803-034 Rotation: PCU: Y
7-803-035 Rotat:Dev.Unit:Bk
7-803-036 Rotat:Dev.Unit:C
7-803-037 Rotat:Dev.Unit:M
7-803-038 Rotat:Dev.Unit:Y
7-803-043 Rotation:ITB Unit
7-803-044 Rotat:ITBCln.Unit
7-803-045 Rotat:Fusing Unit
7-803-046 Rotat:Fus.Roller
7-803-047 Rotat:Fusing Belt
7-803-048 Rotation PTR Unit
7-803-049 Msr TC Bottle
-061 to -078 Displays the value given by the following formula:
(Current revolution / Target revolution) x 100. This shows how much of the unit's
expected lifetime has been used up.
The Rotation% counter is based on rotations, not prints. If the number of rotations
reaches the limit, the machine enters the end condition for that unit. If the print count
lifetime is reached first, the machine also enters the end condition, even though the R
% counter is still less than 100%.
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mg/step]
ENG [0 to 999999999 / - / 1 mm/step]
ENG [0 to 999999999 / - / 1 mg/step ]
Displays the total amount of each waste
toner bottle.
Engine SP Mode Tables - SP7000
483