Ricoh Z-P2 Field Service Manual page 268

5. System Maintenance Reference
1007 001 Development
1007 002 PCU
1007 003 Transfer
1007 004 Int. Transfer
1007 005 Transfer Roller
1007 006 Fuser
1007 007 Fuser Oil
1101 [ToneCtlSet]
1101 001 Tone (Factory)
1101 002 Tone (Prev.)
1101 003 Tone (Current)
1102 [ToneCtlSet]
Sets the printing mode (resolution) for the printer gamma adjustment. The asterisk (*)
shows which mode is set.
1103 [PrnColorSheet]
1103 001 ToneCtlSheet
1103 002 ColorChart
266
• 00: *1200x1200Photo (1 bit, 4 colors)
• 01: 600x600Photo (4 bits, 4 colors)
• 02: 600x600Photo (2 bits, 4 colors)
• 03: 600x600Photo (1 bit, 4 colors)
• 04: 1200x1200Text (1 bit, 4 colors)
• 05: 600x600Text (4 bits, 4 colors)
• 06: 600x600Text (2 bits, 4 colors)
• 07: 600x600Text (1 bit, 4 colors)
[0 or 1 / 1 / 1 /step]
0: OFF, 1: ON
Recalls a set of gamma settings. This can be either a)
the factory setting, b) the previous setting, or c) the
current setting.
Prints the test page to check the color balance before
and after the gamma adjustment.