Ricoh Z-P2 Field Service Manual page 306

5. System Maintenance Reference
2-194-007 Execution Result
2-194-008 Number of Exe.
2-194-009 Number of Failure
2-194-010 Error Result: C
2-194-011 Error Result: M
2-194-012 Error Result: Y
2220 [Skew Origin Set]
Resets the value of the skew adjustment motor for each color.
These SPs must be executed when a new laser optics housing unit is installed.
2-220-001 C:Skew Motor
2-220-002 M:Skew Motor
2-220-003 Y:Skew Motor
2241 [Temp/Humid: Disp]
Displays the environment temperature and humidity.
2-241-001 Temperature
2-241-002 Relative Humidity
2-241-003 Absolute Humidity
2302 [Env.Crrct:Trnsfer] DFU
Environmental Correction: Image Transfer Belt Unit
304
*ENG [0 or 1 / 0 / 1 /step]
0: Completed successfully, 1: Failed
*ENG [0 to 999999 / 0 / 1 times/step]
*ENG [0 to 999999 / 0 / 1 times/step]
*ENG [0 to 9 / 0 / 1 /step]
0: Not done
*ENG
1: Completed successfully
*ENG
2: Cannot detect patterns
3: Fewer lines on the pattern than the target
4: Out of the adjustment range
5 to 9: Not used
ENG [Execute]
ENG
ENG
ENG [–1280 to 1270 / 0 / 0.1 deg/step]
ENG [0 to 1000 / 0 / 0.1%RH/step]
ENG [0 to 100 / 0 / 0.01 g/m
3
/step]