Ricoh Z-P2 Field Service Manual page 418

5. System Maintenance Reference
3-516-032 TnCnmp:IntvlThsh2
3518 [ImgAdj. Exe. Flag] DFU
3-518-008 MUSIC
3-518-009 Drum Phase Adj.
3520 [TrunsferIdleTime] DFU
3-520-001 Temperature:H
3-520-002 Temperature:M
3-520-003 Temperature:L
3-520-004 Temperature:L:ON
005 to Adjusts the threshold temperature for entering the ITB idle rotation after the process
control.
006
3-520-005 TempRangeThrsh:T2
3-520-006 TempRangeThrsh:T1
3522 [Intl ProCon Set]
Adjusts the threshold for the process control at power on.
When the current condition has changed by more than the values of these SPs when
compared with the conditions at the previous operation, the process control at power
on is executed.
3-522-002 No-Use Time Set
3-522-003 Temperature Range
3-522-004 RHumidity Change
3-522-005 AHumidity Change
416
*ENG [0 to 255 / 4 / 1 page/step]
*ENG [0 to 2 / 0 / 1 /step]
*ENG [0 or 1 / 0 / 1/step]
0: OFF. 1: ON
*ENG Specifies the idle rotation times of the ITB
after the process control.
*ENG
[0 or 3 / 1.9 / 1 revolution/step]
*ENG
*ENG
*ENG [20 or 30 / 25 / 1 deg/step]
*ENG [0 or 15 / 15 / 1 deg/step]
*ENG [0 to 1440 / 360 / 1 minute/step]
*ENG [0 to 99 / 10 / 1 deg/step]
*ENG [0 to 99 / 50 / 1 %RH/step]
*ENG [0 to 99 / 6 / 1 g/m
3
/step]