Heating Roller Thermistor - Ricoh Z-P2 Field Service Manual

3. Remove the four screws.
4. Remove the plate [A], and then remove the heating roller thermostats [B].
• Do not re-use a thermostat that is already opened. Safety is not guaranteed if you do this.

Heating Roller Thermistor

1. Fusing front cover
2. Fusing upper cover
3. Fusing lower cover
(page 164 "Cleaning Unit")
(page 165 "Pressure Roller Fusing
(page 165 "Pressure Roller Fusing
Lamp")
Lamp")
Fusing
179