When Reinstalling The Pressure Roller; Heating Roller Fusing Lamp - Ricoh Z-P2 Field Service Manual

4. Replacement and Adjustment

When Reinstalling the Pressure Roller

When replacing the pressure roller, you have to apply lubricant to the following places.
• Apply "Barrierta S552R" (0.15g to 0.25g) to the left end [A] and right end [B] of the pressure
roller as shown above.

Heating Roller Fusing Lamp

1. Fusing unit (page
2. Fusing lower cover
3. Cleaning unit
170
164)
(page 165 "Pressure Roller Fusing
(page 164), Fusing upper cover
Lamp")
(page 165 "Pressure Roller Fusing Lamp")