Leds - Ricoh Z-P2 Field Service Manual

6. Troubleshooting
Fuse
120V-127V
FU3 5A/250V
FU101 15A/250V
FU102 10A/250V
FU103 2A/250V

LEDs

No LEDs are used for this model (except for the Network Interface).
634
Rating
Symptom when turning on the main switch
220V-240V
5A/250V
8A/250V Fusing SC occurs.
6.3A/250V No response
Power to all the anti-condensation heaters not
2A/250V
supplied.
• 5V power to the BCU and bridge board not
supplied.
• 5VS power to the bridge board not
supplied.