Ricoh Z-P2 Field Service Manual page 356

5. System Maintenance Reference
2-621-001 Paper Transfer
2-621-002 Separation DC
2622 [OHP:SW Tmng:LE] DFU
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at
the paper leading edge between the erase margin area and the image area.
2-622-001 Paper Transfer
2-622-002 Separation DC
2623 [OHP:TE Correct] DFU
OHP: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current or or discharge plate DC for
the paper trailing edge in each mode. SP2603 and SP2608 are multiplied by these
SP values.
2-623-001 Paper Transfer
2-623-002 Separation DC
2624 [OHP:SW Tmng:TE] DFU
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at
the paper trailing edge between the erase margin area and the image area.
2-624-001 Paper Transfer
2-624-002 Separation DC
2630 [OHP: EnvCor] DFU
2-630-015 Separation DC
[OHP: Edge-EnvCor] DFU
354
• The paper trailing edge area can be adjusted with SP2624.
*ENG [0 to 995 / 100 / 5%/step]
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 995 / 100 / 5%/step]
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [1 to 100 / 30 / 1 /step]
Adjusts the size correction coefficient
table of the OHP paper for the discharge
plate DC.