Ricoh Z-P2 Field Service Manual page 486

5. System Maintenance Reference
7-803-061 Rotat.(%):PCU:Bk
7-803-062 Rotat.(%):PCU:C
7-803-063 Rotat.(%):PCU:M
7-803-064 Rotat.(%):PCU:Y
7-803-065 Rotat(%):Dev.U:Bk
7-803-066 Rotat(%):Dev.U:C
7-803-067 Rotat(%):Dev.U:M
7-803-068 Rotat(%):Dev.U:Y
7-803-073 Rotat(%):ITB Unit
7-803-074 Rotat(%):ITB ClnU
7-803-075 Rotat(%):Fus.Unit
7-803-076 Rotat(%):Fus.Roll
7-803-077 Rotat(%):Fus.Belt
7-803-078 Rotat(%):PTR Unit
7-803-079 Amt(%):ITB TC Btl
-091 to Displays the value given by the following formula:
-108 (Current printouts / Target printouts) x 100. This shows how much of the unit's
expected lifetime has been used up.
The Page% counter is based on printouts, not revolutions. If the number of printouts
reaches the limit, the machine enters the end condition for that unit. If the revolution
count lifetime is reached first, the machine also enters the end condition, even though
the Page% counter is still less than 100%.
7-803-091 Page (%): PCU: Bk
7-803-092 Page (%): PCU: C
7-803-093 Page (%): PCU: M
7-803-094 Page (%): PCU: Y
484
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
Displays how much of the unit's expected
lifetime has been used up.
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]
ENG [0 to 255 / - / 1 %/step]