5. OTHER MAINTENANCE ITEMS
5.4.26
Main motor (M1)
1. Remove the rear cover.
See P.34
[2]
[1]
[1]
[3]
[1]
7. To reinstall, reverse the order of removal.
54
A0XXF2E015DA
[2]
A0XXF2E050DA
[2]
A0XXF2E051DA
Field Service Ver. 2.0 Jun. 2010
2. Disconnect the connector (CN2) [1]
on the DC power supply.
3. Remove the harness from the har-
ness guide [2].
4. Remove two screws [1], and remove
the harness guide [2].
5. Disconnect the connector [1].
6. Remove four screws (M3x 6) [2], and
remove the main motor [3].
NOTE
• When reinstalling the main motor,
be sure to use the removed screws
[2]. If you use a longer screw, it may
interfere with the gear.