Main Motor (M1) - Konica Minolta BIZHUB 163 Service Manual

6. Other
[1]
25. Temporarily secure the scanner to the front and rear cables.
26. Adjust the position of the scanner and the 2nd/3rd mirrors carriage.
See P.146
6.3.31

Main motor (M1)

1. Remove the rear cover.
See P.47
[2]
[1]
76
22. Wind the upper cable of wire pulley 2
NOTE
• Wind the cable around the inner
A09AF2C527DA
23. Peel off the pieces of tape that
[1]
24. Peel off the tape used to temporarily
A09AF2C528DA
2. Remove two screws [1], and remove
A09AF2C053DA
Field Service Ver. 1.0 Apr. 2007
around pulley D [1] and hook it onto
the hook.
groove in pulley D.
secure the front and rear cable pul-
leys.
secure the cables to the machine
frame. Hook a spring to the leading
edges of the front and rear cables
[1].
the metal plate [2].