Setting by Using PEAP
This machine supports the IEEE802.1 authentication.
Set up this machine and the computer before following the procedure below.
About initial setup and IP address
Easy Setup
1.
Open the Web page of this machine.
How to log in to the Web page
Checking or Changing the Settings of This Machine from a Computer
2.
Log in as the administrator.
3.
Select [Admin Setup].
4.
Select [Network] > [IEEE802.1X].
5.
Select [Enable] from [IEEE802.1X].
6.
Select [PEAP] from [EAP Type].
7.
Enter a user name in [EAP User].
8.
Enter a password in [EAP Password].
9.
Select [Authenticate Server], and then click [Import].
10.
Enter the file name of the CA certificate, and then click [OK].
Specify the certificate issued by the certificate authority that the RADIUS server
obtained. You can import a PEM, DER, and PKCS#7 file.
11.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
12.
Turn the machine off after this machine becomes online.
13.
Connect the LAN cable to the network interface connector.
14.
Connect the LAN cable to the authentication port of an
authentication switch.
15.
Turn the machine on.
16.
Set up this machine.
1159