Table of Contents
Advertisement
I
NSTALLING UPGRADES
This section explains how to install optional equipment into your printer. This includes:
>
additional RAM memory
>
additional paper tray(s)
>
cabinet
M
EMORY UPGRADE
The basic printer model comes equipped with 256MB of main memory. This can be
upgraded with an additional memory board of 256MB or 512MB, giving a maximum total
memory capacity of 768MB.
1.
Switch the printer off and disconnect the AC power cable.
2.
Press the cover release and open the printer's top cover fully.
If the printer has been powered on recently, the fuser will be hot.
This area is clearly labelled. Do not touch.
3.
Pull down the MP Tray using the depressions. Lift the front cover release lever and
lower the front cover.
4.
Loosen the screw (a) securing the right-hand side cover.
O
I
WARNING!
Installing upgrades > 70
Advertisement
Table of Contents
