Assigning an IP Security Policy
1.
If you want to enable Key PFS, select the [Use session key perfect
forward secrecy (PFS)] check box in the [Filter Action Properties]
window.
2.
If you perform IPSec communication with the IPv6 global address,
select the [Accept unsecured communication, but always respond
using IPsec] check box.
3.
Click [OK].
4.
Select the new filter action, and then click [Next].
5.
Select the authentication method on the [Authentication Method]
screen, and then click [Next].
6.
Click [Finish].
7.
Click [OK] in the New IP Security Policy Properties window.
8.
Select the new IP security policy in the [Local Security Policy]
window.
9.
Select [Assign] from the [Action] menu.
10.
Check that [Yes] is displayed for [Policy Assigned] for the new IP
security policy.
11.
Click [x] in the [Local Security Policy] window.
1145