Setting An Ip Filter - Oki MC853 User Manual

2.
Click [Settings].
3.
Enter a value (minutes) in [Authenticate and generate a new key
after every] in the [Key Exchange Settings] window.
Note
Specify the same value as [Lifetime] in the "Phase1 Proposal" setting in
Machine". Enter a value in minutes in this step even if [Lifetime] is specified in seconds.
4.
Click [Methods].
5.
Click [Add] in the [Key Exchange Security Methods] window.
6.
Specify [Integrity algorithm], [Encryption algorithm], and [Diffie-
Hellman group].
Note
Select the same value specified in [IKE Encryption Algorithm], [IKE Hush Algorithm], and
[Diffie-Hellman group] in the "Phase1 Proposal" setting in
7.
Click [OK].
8.
Select [OK] in the [Key Exchange Security Methods] window.
9.
Click [OK] in the [Key Exchange Settings] window.

Setting an IP Filter

1.
Select the [Rules] tab in the IP security policy properties window.
2.
Click [Add].
3.
Click [Next] in [Security Rule Wizard].
4.
Select [This rule does not specify a tunnel] on the [Tunnel
Endpoint] screen, and then click [Next].
5.
Select [All Network Connections] on the [Network Type] screen,
and then click [Next].
6.
Click [Add] on the [IP Filter List] screen.
7.
Click [Add] in the [IP Filter List] window.
8.
Click [Next] on [IP Filter Wizard].
"Setting This
1143
"Setting This
Machine".