Log In as the Administrator
To change settings of the machine on the Web browser, you must log in as the administrator
of the machine.
1.
Click [Administrator Login].
2.
Enter "admin" in [User Name] and the current password in
[Password], and then click [OK].
Memo
The password is the same as the "administrator password" on the operator panel.
3.
Set the machine information that can be checked on a network,
click [OK] or [SKIP].
Note
To omit the setting, click [SKIP].
To not display from the next login, select the [Do not show this page again.] check
1124