Installing the Additional Tray Unit(s) to the Machine
If you want to load more paper, install additional tray units. You must set the printer driver
after installing.
Installing the Additional Tray Unit(s)
Setting the Printer Driver
Setting Additional Tray(s) to the Windows PCL Printer Driver
Setting Additional Tray(s) to the Windows XPS Printer Driver
Setting Additional Tray(s) to the Windows PS Printer Driver
Setting Additional Tray(s) to the Mac OS X Printer Driver
Installing the Additional Tray Unit(s)
Additional Tray Unit
Model Number: N35110A
Note
Be sure to turn the machine off and unplug the power cord and all the cables before installing
the additional tray. Installing the additional tray with the machine turned on may cause the
machine and additional tray to malfunction.
Available Combinations
Machine + Cabinet
Machine + Additional Tray + Cabinet
Machine + Additional Tray + Additional Tray + Caster Base
Machine + Additional Tray + Additional Tray + Additional Tray + Caster Base
This section describes how to install three additional trays as an example.
If you use the cabinet, install in the same manner.
Lift this machine by 3 persons, because it weighs approximately 64 kg.
1.
Turn the machine off, and then unplug the power cord and all the
Cabinet
Injury may result.
47
Caster Base