Installing Options; Installing A Second Tray Unit - Oki MC361dn User Manual

Installing Options


This section explains how to install options on your machine. The following options are available:
 Second tray unit
 Additional RAM (256 MB or 512 MB)
 16 GB SD memory card (MC561dn only)
Note
 Be sure to turn off your machine and unplug the AC cable and Ethernet or USB cable before installing options. Installing options
while your machine is turned on may damage your machine and options.
Reference
 For details on the location of each component of the machine, refer to "Names of Components" P. 14.

Installing a Second Tray Unit

Install an optional second tray unit (tray 2) when
you want to increase the paper capacity of your
machine. After installation, you need to configure
the printer driver settings.
Model Number : N34311A
Reference
 For the specification of the second tray unit (Tray2), refer
to "Loading Paper" P. 66.
Installation
It may cause injury!
CAUTION
 At least two people are needed to lift the machine
safely because it weighs about 29 Kg.
Turn off your machine, and then unplug
1
the AC cable and the Ethernet or USB
cable.
Reference
 "Turning Off Your Machine" P. 19
Lift your machine and align the three
2
pins of the second tray unit with the
holes at the bottom of your machine.
Place your machine on the second tray
3
unit gently.
Attach the lock parts.
4
Plug the AC cable and Ethernet or USB
5
cable into your machine, and then turn
on the power switch.
- 21 -
Installing Options
1