Installing Options
Installing Options
This section explains how to install options on your machine. The following options are available:
Second tray unit
Note
Be sure to hold down the power switch for about a second to turn off the power and unplug the AC cable and Ethernet or USB
cable before installing options. Installing options while your machine is turned on may damage your machine and options.
Reference
For details on the location of each component of the machine, refer to
Installing a Second Tray Unit
Install an optional second tray unit (tray 2) when
you want to increase the paper capacity of your
machine. After installation, you need to configure
the printer driver settings.
Model Number : N22204A
Reference
For the specification of the second tray unit (Tray2), refer
to
"Loading Paper" P.
32.
Installation
Hold down the power switch for about a
1
second to turn off the power, and then
unplug the AC cable and the Ethernet or
USB cable.
Reference
"Turning Off Your Machine" P. 20
"Names of Components" P.
Lift your machine and align the three
2
pins of the second tray unit with the
holes at the bottom of your machine.
Place your machine on the second tray
3
unit gently.
Attach the lock parts.
4
Plug the AC cable and Ethernet or USB
5
cable into your machine, and then push
the power switch.
- 22 -
15.