Installing The Second Tray Unit (Optional) To The Machine - Oki MB472dn User Manual

Installing the Second Tray Unit (Optional) to the Machine

Installing the Second Tray Unit (Optional)
Setting the Printer Driver
Setting Tray 2 (Optional) to the Windows PCL Printer Driver
Setting Tray 2 (Optional) to the Windows XPS Printer Driver
Setting Tray 2 (Optional) to the Mac OS X Printer Driver
If you want to load more paper, install the second tray unit (Tray 2). You must set the printer driver after installing.
Installing the Second Tray Unit (Optional)
Note
Be sure to turn the machine off and unplug the power cord and all the cables before installing the option. Installing the option with
the machine turned on may cause the machine and option to malfunction.
For the specifications of the second tray unit (Tray 2), refer to
Lift this machine by two or more persons, because it weighs approximately 29 kg.
1.
Turn the machine off, and then unplug the power cord and all the cables.
Turning the Machine Off
2.
Lift the machine, and then align the three pins of the second tray unit with the holes at the bottom of
the machine.
"About Paper Types That Can be Loaded and Storage
Injury may result.
787
Methods".