Scanning; Changing Settings In Simple Mode - Oki MB472dn User Manual

For Windows

Scanning

Changing Settings in Simple Mode

Changing Settings in Advanced Mode
Note
To use this function, a TWAIN-compatible application (such as PaperPort) must be installed.
Memo
This section uses PaperPort as an example.
This section describes the procedure when using Remote Scan with a USB connection. For details on network connections and how
to start scanning with Scan to PC, refer to
Scanning
1.
Set a document in the ADF or on the document glass.
2.
Start PaperPort on the computer.
3.
Click [Select], and then select the scanner driver of the machine.
4.
Click [Scan].
5.
Click a scan button.
Scanning starts.
6.
Click [Quit].
7.
If you do not scan other pages or the back side , click [Quit].
Memo
The five buttons ([Scan Photograph], [Scan Magazine], [Scan for OCR], [Scan for Internet], [Customize]) are registered as the
default settings.
Changing Settings in Simple Mode
You can adjust how a document is scanned by changing the driver settings.
The following explains each setting item.
You can change the settings of five registered buttons.
"Sending Scanned Data to a
144
Computer".